How To Update A Spypoint Camera

LINK-MICRO-LTE Support

Cellular Trail Photographic camera

• FAQs
• Troubleshooting
• Documentation
• Firmware update

FAQs

Preparation and Installation

Before Installing Your Device in the Field

How to Properly Examination Your Device.

Video: How to cull the correct batteries for your camera

Getting Gear up For The Flavor: Reinstall My Device

Video: Understanding the Basic Settings in the SPYPOINT Mobile App

Video: Understand the Cellular Setup Settings in the SPYPOINT App

Video: How to format my SD card

Video: Agreement the Advanced Settings in the SPYPOINT App

How to Activate your LINK-MICRO Series Camera or Jail cell-LINK Device

Device Behavior

Before activating my device

How the Detection System Works.

What is Trigger Speed?

How Images and Videos are Saved.

Best Practices for Resolving False Triggers

Cellular Connectivity

Video: How to Activate your SPYPOINT LINK-MICRO-LTE Trail Camera

Which camera model should I buy for AT&T service that offers the best signal?

My cellular device has never sent any photos or communicated

LINK-MICRO-LTE cocky-troubleshooting

Video: How to utilize a firmware update

How to verify if my cellular device is communicating

How to correctly install my SIM card(s).

Video: Why is my Newly Activated SPYPOINT Camera Not Sending Photos?

Video: Why is my Previously Working SPYPOINT Camera Non Sending Photos

My cellular device has communicated just has never sent any photos

My device is in-hand: How to get my device to send photos one time over again

My device is NOT in-paw: How to get my device to send photos one time over again

How to optimize signal force?

Troubleshooting

Documentation

Firmware update

Delight brand certain you select the right Link-Micro model before downloading the firmware files (LINK-MICRO / LINK-MICRO-LTE / LINK MICRO-S-LTE / LINK-MICRO-WM)

Access this page from a computer to download and install the firmware update.

---

Modify log

Version:

V1.18.13-8

Engagement:

2021-04-07

Improvements:

- Improved the cellular connectivity.

---

Version:

V1.17.12-178

Appointment:

2020-xi-11

Improvements:

-improved multiple Sim back up
-Correction of small bugs

---

Version:

V1.16.11-half-dozen

Date:

2020-x-06

Improvements:

Add cellular provider.
Better cellular connectivity.

---

Version:

V1.xv.10-20

Date:

2020-07-07

Improvements:

• Resolved an effect where the camera could not obtain the right date and time on European models.
• Improve transmission time
• Modest bug fixes and other improvements

---

Installation instructions (PC)

1. Make sure to use a Micro SD card class 10/U1 up to 32GB.
2. Format the micro SD bill of fare.
3. Download the update file from our website.
4. Open up the downloaded .zip file by double-clicking on it.
5. Open the photographic camera proper noun folder.
6. Copy all the files from the .zip file onto the Micro SD card.
7. Verify the copy has been successful on your Micro SD card.
8. Eject the Micro SD card from the computer.
9. Brand sure the camera is turned OFF.
10. Insert the Micro SD menu into the camera.
11. Power ON the camera.
12. The camera will run the firmware update past itself for few minutes. («Status» light flashes orangish rapidly).
13. Then, information technology will flash green for a short period.
14. Then, it volition flash orange slowly.
15. And then, the camera volition restart by itself and it will become through the connection process. («Condition» light flashes light-green).
16. The camera firmware volition be up to appointment.

Installation instructions (MAC)

1. Brand sure to employ a Micro SD card class x/U1 upwardly to 32GB.
2. Format the Micro SD card on your figurer (Format:MS-DOS(FAT)).
3. Download the update file from our website.
4. Double-click on the .nothing file.
5. Open up the camera name folder.
6. Copy all the files from the .zip file onto the Micro SD carte.
7. Verify the re-create has been successful on your Micro SD card.
8. On the Micro SD card, right-click on MacOS_PrepareSDCard.command and select open with terminal to run the file.
9. Squirt the Micro SD card from the computer.
10. Make certain the camera is turned OFF.
11. Insert the Micro SD card into the photographic camera.
12. Ability ON the photographic camera.
13. The camera volition run the firmware update by itself for effectually 90 seconds. («Status» light flashes orange quickly).
14. And then, it volition flash green for a short period.
15. And so, information technology will wink orange slowly.
16. Then, the camera will restart by itself and information technology will go through the connection process. («Status» light flashes green).
17. The camera firmware will be up to date.

Confirm the update was successful
one. After the next transfer of the camera, access the "Status" tab in the SPYPOINT app.
2. Under "General Information", the version number will announced, for example: V1.11.06.

If yous practise not take the correct version, redo the firmware update with another Micro SD card.

Where to find the Rev ID ?

For LINK serial

1. Open SPYPOINT app
2. Connect to your account
3. Select STATUS tab'
4. Version
5. Enter the number after "Rev" in the field, eg: v2.06.nineteen Rev 5

Your Rev ID is 5 in this case

*If no Rev ID is indicated, tap 0 in the field

Other cameras

1. Dwelling carte
2. Settings
3. General
4. Well-nigh the devise
5. H/W Version
6. Enter the number after "rev." in the field, eg: rev v

Your Rev ID is 5 in this case

Source: https://www.spypoint.com/en/support/cellular-trail-camera/product-link-micro-lte.html

Posted by: morrisondervants71.blogspot.com

Share this post